Sql Developer Mac Os Download
2021年7月3日Download here: http://gg.gg/v8fic
The script content on this page is for navigation purposes only and does not alter the content in any way.
*Microsoft Sql Developer Download
*Download Sql Developer 19
*Pl Sql Developer Mac
*Sql Developer Free Download For Mac Os
Note:
I have not tested this thoroughly, but at the very least I am able to bring up SQL Developer 19.1.0.094, connect to a database, and run queries on it. It did not work if I tried to use their instructions to install the ’latest’ version: brew cask install adoptopenjdk, as this seems to install OpenJDK 12.x as of May 2019. Operating Systems Mac OS X 10.11, Mac OS X 10.9, Mac OS X 10.10, Mac OS X 10.5, Macintosh, Mac OS X 10.4, Mac OS X 10.6, Mac OS X 10.4 Intel, Mac OS X 10.3, Mac OS X. This guide assumes that you plan to download the SQL Developer kit (.zip) file and install it as a freestanding tool.
If you plan to SQL Developer as part of the Oracle Database release 11 installation, see the Oracle Database installation documentation.
Please read the information in this chapter before you install Oracle SQL Developer. This chapter contains the following major sections:1.1 SQL Developer System Recommendations
This section describes the recommended minimum values for CPU, memory, display, disk storage, and other resources on the supported systems.
Table 1-1 Recommendations for Windows SystemsResourceRecommended Minimum Value
Operating System
Windows 2000-Service Pack 4
Windows XP-Service Pack 2
Windows 2003 R2
CPU Type and Speed
Pentium IV 2 GHz MHz or faster
Memory
1 GB RAM
Display
65536 colors, set to at least 1024 X 768 resolution
Hard Drive Space
42 MB if you already have JDK 1.5
110 MB if you do not have JDK 1.5
Java SDK
JDK 5.0 Update 6 or later for Windows, available at: http://www.javasoft.com (If you do not have this SDK installed, you can use SQL Developer, but you must download and install the kit for Windows systems with no Java SDK or with a Sun Java SDK release lower than 5.0.)
Table 1-2 Recommendations for Linux SystemsResourceRecommended Minimum Value
Operating System
Red Hat Enterprise Linux 3.0
Fedora Core 4
CPU Type and Speed
Pentium IV 2 GHz or faster
Memory
1 GB RAM
Display
65536 colors, set to at least 1024 X 768 resolution
Hard Drive Space
110 MB
Java SDK
JDK 5.0 Update 6 or later for Linux, available at: http://www.javasoft.com
Table 1-3 Recommendations for Mac OS X SystemsResourceRecommended Minimum Value
Operating System
Apple Mac OS X Version 10.4.x
CPU Type and Speed
Dual 1.25 GHz G4/G5 (1 GHz G4 minimum)
Memory
1.5 GB RAM (1 GB minimum)
Display
’Thousands’ of colors
Hard Drive Space
110 MB
Java SDK
Sun J2SE 1.5 release 1, available at: http://www.apple.com/support/downloads/java2se50release1.html
1.2 Installing and Starting SQL Developer
This section contains subsections with instructions for installing SQL Developer on all supported systems.
SQL Developer does not require an installer. To install SQL Developer, you will need an unzip tool. You can download a free, cross-platform unzip tool, Info-Zip, available at http://www.info-zip.org/.
Important: Do not install SQL Developer into any existing ORACLE_HOME. You will not be able to uninstall it using Oracle Universal Installer.
Important: If you are using a pre-release (Early Adopter) version of SQL Developer, and if you want to be able to continue to use this pre-release version after installing the official release kit, you must unzip the official release kit into a different directory than the one used for the pre-release version.
For Windows systems, there are two kits: one for systems on which the Sun Java SDK release 1.5 is installed, and another for systems with no Java SDK or a Sun Java SDK release lower than 1.5. Be sure to download the appropriate kit.
Before you install SQL Developer, look at the remaining sections of this guide to see if you need to know or do anything else first.
The steps for installing SQL Developer depend on whether or not you will be using it on a Windows system that does not have the Sun Java SDK release 1.5 installed:
*
For a Windows system with the Sun Java release 1.5 installed, follow the instructions in Section 1.2.1.
*
For all other systems (Linux and Mac OS X systems, and Windows systems with no Java SDK or a Sun Java SDK release lower than 1.5 installed), follow the instructions in Section 1.2.2.1.2.1 Windows Systems with JDK1.5
To install and start SQL Developer on a Windows system on which the Sun Java SDK release 1.5 is installed, follow these steps:
*
Unzip the SQL Developer kit into a folder (directory) of your choice (for example, C:Program Files). This folder will be referred to as <sqldeveloper_install>.
Unzipping the SQL Developer kit causes a folder named sqldeveloper to be created under the <sqldeveloper_install> folder (for example, C:Program Filessqldeveloper). It also causes many files and folders to be placed in and under that directory.
*
To start SQL Developer, go to <sqldeveloper_install>sqldeveloper, and double-click sqldeveloper.exe.
If you are asked to enter the full pathname for java.exe, click Browse and find java.exe. For example, the path might have a name similar to C:Program FilesJavajdk1.5.0_06binjava.exe.
After SQL Developer starts, you can connect to any database by right-clicking the Connections node in the Connections Navigator and selecting New Database Connection. Alternatively, if you have any exported connections (see Section 1.4 or Section 1.10), you can import these connections and use them.
You can learn about SQL Developer by clicking Help, then Table of Contents, and reading the help topics under SQL Developer Concepts and Usage.1.2.2 Linux and Mac OS X Systems, and Windows Systems without JDK 5.0
SQL Developer requires that the Sun Java J2SE JDK 5.0 (Update 5 or later) be installed on the system. If you need to install this JDK, go to http://java.sun.com/j2se/1.5.0/download.jsp and click the link for downloading JDK 5.0 Update 6 (or the most recent available update).
To install and start SQL Developer, follow these steps:
*
Unzip the SQL Developer kit into a directory (folder) of your choice. This directory location will be referred to as <sqldeveloper_install>.
Unzipping the SQL Developer kit causes a directory named sqldeveloper to be created under the <sqldeveloper_install> directory. It also causes many files and folders to be placed in and under that directory.
*
To start SQL Developer, go to the sqldeveloper directory under the <sqldeveloper_install> directory, and do one of the following, as appropriate for your operating system:
On Linux and Mac OS X systems, run sh sqldeveloper.sh.
On Windows systems, double-click sqldeveloper.exe.
After SQL Developer starts, you can connect to any database by right-clicking the Connections node in the Connections Navigator and selecting New Database Connection. Alternatively, if you have any exported connections (see Section 1.4 or Section 1.10), you can import these connections and use them.
You can learn about SQL Developer by clicking Help, then Table of Contents, and reading the help topics under SQL Developer Concepts and Usage.1.3 Migrating User Settings from Release 1.0
The first time you start SQL Developer after installing it or after adding any extensions, you are asked if you want to migrate your user settings from a previous release. (This occurs regardless of whether there was a previous release on your system.)
Note: Migration of user settings is supported only from SQL Developer Release 1.0 to Release 1.1. It is not supported for migration from a pre-release version of 1.1 to Release 1.1.
These settings refer to database connections, reports, and certain SQL Developer user preferences that you set in a previous version by clicking Tools and then Preferences. However, some user preferences are not saved, and you must re-specify these using the new release.
To migrate user settings from SQL Developer Release 1.0:
*
Unzip the Release 1.1 kit into an empty directory (folder). Do not delete or overwrite the directory into which you unzipped the Release 1.0 kit.
*
When you start SQL Developer Release 1.1, click Yes when asked if you want to migrate settings from a previous release.
*
In the dialog box that is displayed, do not accept the default location for the settings. Instead, specify the location of your Release 1.0 settings, which might be a folder whose path ends with sqldeveloperjdevsystem.
See also Section 1.4, ’Migrating Information from Previous Releases’.1.4 Migrating Information from Previous Releases
If you have used a previous release of SQL Developer or a pre-release version of the current release, you may want to preserve database connections that you have been using. To preserve database connections, save your existing database connections in an XML file. To save the connections, right-click the Connections node in the Connections Navigator and select Export Connections. After you complete the installation described in this guide, you can use those connections by right-clicking the Connections node in the Connections Navigator and selecting Import Connections
If you want to use any user-defined reports or the SQL history from a previous version, see Section 1.5 for information about where these are located. If you want to use any user-defined reports or the SQL history from Release 1.0 with both Releases 1.0 and 1.1, you must save them before using Release 1.1, because Release 1.1 modifies the files to a format that is incompatible with Release 1.0.
SQL Developer preferences (specified by clicking Tools and then Preferences) from a pre-release version of the current release cannot currently be saved and reused; you must re-specify any desired preferences.
Note: If you want to uninstall your pre-release version of SQL Developer before installing this release, see Section 1.10, ’Uninstalling SQL Developer’.1.5 Location of User-Related Information
SQL Developer stores user-related information in several places, with the specific location depending on the operating system and certain environment specifications. User-related information includes user-defined reports, user-defined snippets, SQL Worksheet history, and SQL Developer user preferences.Microsoft Sql Developer Download
In most cases, your user-related information is stored outside the SQL Developer installation directory hierarchy, so that it is preserved if you delete that directory and install a new version. The exception to this is on Windows systems, where SQL Developer user preferences are stored under the installation directory. To preserve preferences on Windows systems when upgrading to a more recent version of the same SQL Developer release, but not to upgrade from Release 1.0 to 1.1, use the Check for Updates feature (click Help, then Check for Updates) to upgrade your system.
The user-related information is stored in or under the following location:
*
On Windows systems: the HOME environment variable location, if defined; otherwise the SQLDEVELOPER_USER_DIR location, if defined; otherwise as indicated in the following table
*
On Linux and Mac OS X systems: the SQLDEVELOPER_USER_DIR location, if defined; otherwise as indicated in the following table
The following table shows the typical default locations (under a directory or in a file) for specific types of resources on different operating systems. (Note the period in the name of any directory or folder named .sqldeveloper.)
Table 1-4 Default Locations for User-Related InformationResource TypeWindows SystemsLinux or Mac OS X Systems
User-defined reports
C:Documents and Settings<user-name>.sqldeveloperUserReports.xml
~/.sqldeveloper/UserReports.xml
User-defined snippets
C:Documents and Settings<user-name>.sqldeveloperUserSnippets.xml
~/.sqldeveloper/UserSnippets.xml
SQL history
C:Documents and Settings<user-name>.sqldeveloperSqlHistory.xml
~/.sqldeveloper/system/
SQL Worksheet archive filesFoot 1
C:Documents and Settings<user-name>.sqldevelopertmp
~/.sqldeveloper/tmp/
SQL Developer user preferences
<sqldeveloper_install>sqldevelopersqldevelopersystem
~/.sqldeveloper/system/
Footnote 1 SQL Worksheet archive files contain SQL statements that you have entered. These files begin with sqldev and then have a random number (for example, sqldev14356.sql). If you close SQL Developer with a SQL Worksheet open that contains statements, you will be prompted to save these files.
To specify a non-default SQLDEVELOPER_USER_DIR location, do either of the following:
*
Set the SQLDEVELOPER_USER_DIR environment variable to specify another directory path.
*
Edit the <sqldeveloper_install>sqldevelopersqldeveloperbinsqldeveloper.conf file and substitute the desired directory path for SQLDEVELOPER_USER_DIR in the following line:
If you want to prevent other users from accessing your user-specific SQL Developer information, you must ensure that the appropriate permissions are set on the directory where that information is stored or on a directory above it in the path hierarchy. For example, on a Windows system you may want to ensure that the sqldeveloper folder and the <user-name>.sqldeveloper folder under Documents and Settings are not shareable; and on a Linux or Mac OS X system you may want to ensure that the ~/.sqldeveloper directory is not world-readable.1.6 Database Certification for SQL Developer (Oracle and Third-Party)
This section describes Oracle and non-Oracle (third-party) databases that are certified for use with SQL Developer.
Table 1-5 lists the Oracle database certifications.
Table 1-5 Oracle Database Certification for SQL DeveloperProductReleases
Iron man 2 pc game free download for windows 7. Oracle Database
Oracle9i (9.2.0.1 and later)
Oracle10g
Oracle Database Express Edition
Oracle10g
SQL Developer can be used to view metadata and data of several non-Oracle (third-party) databases. Table 1-6 lists the third-party database certifications.
Table 1-6 Non-Oracle (Third-Party) Database Certification for SQL DeveloperDatabaseReleasesNotes
Microsoft Access
Access 97
Access 2000
Access 2003
For any Access release: no JDBC driver needed, but you must ensure read access to system tables in the .mdb file.
Microsoft SQL Server
SQL Server 7
SQL Server 2000
SQL Server 2005
For any Microsoft SQL Server release: JDBC driver jtds-1.2.jar required; included in jtds-1.1-dist.zip available from sourceforge.net.
MySQL
MySQL 3.x
MySQL 4.x
MySQL 5.x
For any MySQL release: JDBC driver required. For MySQL 5.x: mysql-connector-java-5.0.4-bin.jar, which is included in mysql-connector-java-5.0.4.zip
For information about creating and using connections to third-party databases, see the information about database connections in the SQL Developer online help or Oracle Database SQL Developer User’s Guide.1.7 Advanced Security for JDBC Connection to the Database
You are encouraged to use Oracle Advanced Security to secure a JDBC connection to the database. Both the JDBC OCI and the JDBC Thin drivers support at least some of the Oracle Advanced Security features. If you are using the OCI driver, you can set relevant parameters in the same way that you would in any Oracle client setting. The JDBC Thin driver supports the Oracle Advanced Security features through a set of Java classes included with the JDBC classes in a Java Archive (JAR) file and supports security parameter settings through Java properties objects.
For more information about using Oracle Advanced Security, see Oracle Database JDBC Developer’s Guide and Reference.1.8 Finding SQL Developer Accessibility Information
For the latest configuration information or for information on addressing accessibility and assistive technology issues, see the Oracle Accessibility FAQ at http://www.oracle.com/accessibility/faq.html.
Also, check the SQL Developer release notes (readme.txt file) to see if there are any currently known issues regarding accessibility.1.9 Using a Screen Reader and Java Access Bridge with SQL Developer
To make the best use of our accessibility features, Oracle Corporation recommends the following minimum technology stack:
*
Windows 2000 or Windows XP
*
Java Sun J2SE 1.5.0_05
*
Sun Java Access Bridge 1.1 or higher
*
JAWS 3.70.87, or 5.10 or higher
Follow these steps to set up a screen reader and Java Access Bridge. If you are using JAWS 3.70.87, see the additional configuration information provided after the procedure.
*
Install the screen reader, if it is not already installed. (See the documentation for your screen reader for more information about installation.)
*
Install SQL Developer.
*
Download Java Access Bridge for Windows version 1.1. The file you will download is accessbridge-1_1.zip. It is available from http://java.sun.com/products/accessbridge. (See the Java Access Bridge documentation available from this Web site for more information about installation and the Java Access Bridge.)
*
After downloading the file, extract (unzip) the contents to a folder, for example, accessbridge_home.
*
Install Java Access Bridge by running Install.exe from the <accessbridge_home>installer folder.
The installer first checks the SDK version for compatibility, then the Available Java virtual machines dialog displays.
*
Click Search disks. Then select to search only the drive that contains the SQL Developer build and the SDK version in the program files directory (if it exists).
The search process can take a long time on a large disk with many instances of SDK or SQL Developer, or when searching multiple disks. However, unless you complete an exhaustive search of your disk, Access Bridge will not be optimally configured, and will not be correctly installed to all of the Java VMs on your system. After selecting the disk to search, click Search.
*
Confirm that you want to install the Java Access Bridge into each of the Java virtual machines displayed in the dialog, by clicking Install in All.
*
Click OK when you see the Installation Completed message.
*
Confirm that the following files have been installed in the WinntSystem32 directory (or the equivalent Windows 2000 or XP directory), or copy them from <accessbridge_home>installerinstallerFiles because they must be in the system path in order to work with SQL Developer:
Note that the system directory is required in the PATH system variable.
*
Confirm that the following files have been installed in the <sqldeveloper_install>jdkjrelibext directory, or copy them from <accessbridge_home>installerinstallerFiles:
*
Confirm that the file accessibility.properties has been installed in the <sqldeveloper_install>jdkjrelibext directory, or copy it from <accessbridge_home>installerinstallerFiles. Confirm that the file accessibility.properties includes the following lines:
*
Only if you are using JAWS version 3.7, do the following: modify t
https://diarynote-jp.indered.space
The script content on this page is for navigation purposes only and does not alter the content in any way.
*Microsoft Sql Developer Download
*Download Sql Developer 19
*Pl Sql Developer Mac
*Sql Developer Free Download For Mac Os
Note:
I have not tested this thoroughly, but at the very least I am able to bring up SQL Developer 19.1.0.094, connect to a database, and run queries on it. It did not work if I tried to use their instructions to install the ’latest’ version: brew cask install adoptopenjdk, as this seems to install OpenJDK 12.x as of May 2019. Operating Systems Mac OS X 10.11, Mac OS X 10.9, Mac OS X 10.10, Mac OS X 10.5, Macintosh, Mac OS X 10.4, Mac OS X 10.6, Mac OS X 10.4 Intel, Mac OS X 10.3, Mac OS X. This guide assumes that you plan to download the SQL Developer kit (.zip) file and install it as a freestanding tool.
If you plan to SQL Developer as part of the Oracle Database release 11 installation, see the Oracle Database installation documentation.
Please read the information in this chapter before you install Oracle SQL Developer. This chapter contains the following major sections:1.1 SQL Developer System Recommendations
This section describes the recommended minimum values for CPU, memory, display, disk storage, and other resources on the supported systems.
Table 1-1 Recommendations for Windows SystemsResourceRecommended Minimum Value
Operating System
Windows 2000-Service Pack 4
Windows XP-Service Pack 2
Windows 2003 R2
CPU Type and Speed
Pentium IV 2 GHz MHz or faster
Memory
1 GB RAM
Display
65536 colors, set to at least 1024 X 768 resolution
Hard Drive Space
42 MB if you already have JDK 1.5
110 MB if you do not have JDK 1.5
Java SDK
JDK 5.0 Update 6 or later for Windows, available at: http://www.javasoft.com (If you do not have this SDK installed, you can use SQL Developer, but you must download and install the kit for Windows systems with no Java SDK or with a Sun Java SDK release lower than 5.0.)
Table 1-2 Recommendations for Linux SystemsResourceRecommended Minimum Value
Operating System
Red Hat Enterprise Linux 3.0
Fedora Core 4
CPU Type and Speed
Pentium IV 2 GHz or faster
Memory
1 GB RAM
Display
65536 colors, set to at least 1024 X 768 resolution
Hard Drive Space
110 MB
Java SDK
JDK 5.0 Update 6 or later for Linux, available at: http://www.javasoft.com
Table 1-3 Recommendations for Mac OS X SystemsResourceRecommended Minimum Value
Operating System
Apple Mac OS X Version 10.4.x
CPU Type and Speed
Dual 1.25 GHz G4/G5 (1 GHz G4 minimum)
Memory
1.5 GB RAM (1 GB minimum)
Display
’Thousands’ of colors
Hard Drive Space
110 MB
Java SDK
Sun J2SE 1.5 release 1, available at: http://www.apple.com/support/downloads/java2se50release1.html
1.2 Installing and Starting SQL Developer
This section contains subsections with instructions for installing SQL Developer on all supported systems.
SQL Developer does not require an installer. To install SQL Developer, you will need an unzip tool. You can download a free, cross-platform unzip tool, Info-Zip, available at http://www.info-zip.org/.
Important: Do not install SQL Developer into any existing ORACLE_HOME. You will not be able to uninstall it using Oracle Universal Installer.
Important: If you are using a pre-release (Early Adopter) version of SQL Developer, and if you want to be able to continue to use this pre-release version after installing the official release kit, you must unzip the official release kit into a different directory than the one used for the pre-release version.
For Windows systems, there are two kits: one for systems on which the Sun Java SDK release 1.5 is installed, and another for systems with no Java SDK or a Sun Java SDK release lower than 1.5. Be sure to download the appropriate kit.
Before you install SQL Developer, look at the remaining sections of this guide to see if you need to know or do anything else first.
The steps for installing SQL Developer depend on whether or not you will be using it on a Windows system that does not have the Sun Java SDK release 1.5 installed:
*
For a Windows system with the Sun Java release 1.5 installed, follow the instructions in Section 1.2.1.
*
For all other systems (Linux and Mac OS X systems, and Windows systems with no Java SDK or a Sun Java SDK release lower than 1.5 installed), follow the instructions in Section 1.2.2.1.2.1 Windows Systems with JDK1.5
To install and start SQL Developer on a Windows system on which the Sun Java SDK release 1.5 is installed, follow these steps:
*
Unzip the SQL Developer kit into a folder (directory) of your choice (for example, C:Program Files). This folder will be referred to as <sqldeveloper_install>.
Unzipping the SQL Developer kit causes a folder named sqldeveloper to be created under the <sqldeveloper_install> folder (for example, C:Program Filessqldeveloper). It also causes many files and folders to be placed in and under that directory.
*
To start SQL Developer, go to <sqldeveloper_install>sqldeveloper, and double-click sqldeveloper.exe.
If you are asked to enter the full pathname for java.exe, click Browse and find java.exe. For example, the path might have a name similar to C:Program FilesJavajdk1.5.0_06binjava.exe.
After SQL Developer starts, you can connect to any database by right-clicking the Connections node in the Connections Navigator and selecting New Database Connection. Alternatively, if you have any exported connections (see Section 1.4 or Section 1.10), you can import these connections and use them.
You can learn about SQL Developer by clicking Help, then Table of Contents, and reading the help topics under SQL Developer Concepts and Usage.1.2.2 Linux and Mac OS X Systems, and Windows Systems without JDK 5.0
SQL Developer requires that the Sun Java J2SE JDK 5.0 (Update 5 or later) be installed on the system. If you need to install this JDK, go to http://java.sun.com/j2se/1.5.0/download.jsp and click the link for downloading JDK 5.0 Update 6 (or the most recent available update).
To install and start SQL Developer, follow these steps:
*
Unzip the SQL Developer kit into a directory (folder) of your choice. This directory location will be referred to as <sqldeveloper_install>.
Unzipping the SQL Developer kit causes a directory named sqldeveloper to be created under the <sqldeveloper_install> directory. It also causes many files and folders to be placed in and under that directory.
*
To start SQL Developer, go to the sqldeveloper directory under the <sqldeveloper_install> directory, and do one of the following, as appropriate for your operating system:
On Linux and Mac OS X systems, run sh sqldeveloper.sh.
On Windows systems, double-click sqldeveloper.exe.
After SQL Developer starts, you can connect to any database by right-clicking the Connections node in the Connections Navigator and selecting New Database Connection. Alternatively, if you have any exported connections (see Section 1.4 or Section 1.10), you can import these connections and use them.
You can learn about SQL Developer by clicking Help, then Table of Contents, and reading the help topics under SQL Developer Concepts and Usage.1.3 Migrating User Settings from Release 1.0
The first time you start SQL Developer after installing it or after adding any extensions, you are asked if you want to migrate your user settings from a previous release. (This occurs regardless of whether there was a previous release on your system.)
Note: Migration of user settings is supported only from SQL Developer Release 1.0 to Release 1.1. It is not supported for migration from a pre-release version of 1.1 to Release 1.1.
These settings refer to database connections, reports, and certain SQL Developer user preferences that you set in a previous version by clicking Tools and then Preferences. However, some user preferences are not saved, and you must re-specify these using the new release.
To migrate user settings from SQL Developer Release 1.0:
*
Unzip the Release 1.1 kit into an empty directory (folder). Do not delete or overwrite the directory into which you unzipped the Release 1.0 kit.
*
When you start SQL Developer Release 1.1, click Yes when asked if you want to migrate settings from a previous release.
*
In the dialog box that is displayed, do not accept the default location for the settings. Instead, specify the location of your Release 1.0 settings, which might be a folder whose path ends with sqldeveloperjdevsystem.
See also Section 1.4, ’Migrating Information from Previous Releases’.1.4 Migrating Information from Previous Releases
If you have used a previous release of SQL Developer or a pre-release version of the current release, you may want to preserve database connections that you have been using. To preserve database connections, save your existing database connections in an XML file. To save the connections, right-click the Connections node in the Connections Navigator and select Export Connections. After you complete the installation described in this guide, you can use those connections by right-clicking the Connections node in the Connections Navigator and selecting Import Connections
If you want to use any user-defined reports or the SQL history from a previous version, see Section 1.5 for information about where these are located. If you want to use any user-defined reports or the SQL history from Release 1.0 with both Releases 1.0 and 1.1, you must save them before using Release 1.1, because Release 1.1 modifies the files to a format that is incompatible with Release 1.0.
SQL Developer preferences (specified by clicking Tools and then Preferences) from a pre-release version of the current release cannot currently be saved and reused; you must re-specify any desired preferences.
Note: If you want to uninstall your pre-release version of SQL Developer before installing this release, see Section 1.10, ’Uninstalling SQL Developer’.1.5 Location of User-Related Information
SQL Developer stores user-related information in several places, with the specific location depending on the operating system and certain environment specifications. User-related information includes user-defined reports, user-defined snippets, SQL Worksheet history, and SQL Developer user preferences.Microsoft Sql Developer Download
In most cases, your user-related information is stored outside the SQL Developer installation directory hierarchy, so that it is preserved if you delete that directory and install a new version. The exception to this is on Windows systems, where SQL Developer user preferences are stored under the installation directory. To preserve preferences on Windows systems when upgrading to a more recent version of the same SQL Developer release, but not to upgrade from Release 1.0 to 1.1, use the Check for Updates feature (click Help, then Check for Updates) to upgrade your system.
The user-related information is stored in or under the following location:
*
On Windows systems: the HOME environment variable location, if defined; otherwise the SQLDEVELOPER_USER_DIR location, if defined; otherwise as indicated in the following table
*
On Linux and Mac OS X systems: the SQLDEVELOPER_USER_DIR location, if defined; otherwise as indicated in the following table
The following table shows the typical default locations (under a directory or in a file) for specific types of resources on different operating systems. (Note the period in the name of any directory or folder named .sqldeveloper.)
Table 1-4 Default Locations for User-Related InformationResource TypeWindows SystemsLinux or Mac OS X Systems
User-defined reports
C:Documents and Settings<user-name>.sqldeveloperUserReports.xml
~/.sqldeveloper/UserReports.xml
User-defined snippets
C:Documents and Settings<user-name>.sqldeveloperUserSnippets.xml
~/.sqldeveloper/UserSnippets.xml
SQL history
C:Documents and Settings<user-name>.sqldeveloperSqlHistory.xml
~/.sqldeveloper/system/
SQL Worksheet archive filesFoot 1
C:Documents and Settings<user-name>.sqldevelopertmp
~/.sqldeveloper/tmp/
SQL Developer user preferences
<sqldeveloper_install>sqldevelopersqldevelopersystem
~/.sqldeveloper/system/
Footnote 1 SQL Worksheet archive files contain SQL statements that you have entered. These files begin with sqldev and then have a random number (for example, sqldev14356.sql). If you close SQL Developer with a SQL Worksheet open that contains statements, you will be prompted to save these files.
To specify a non-default SQLDEVELOPER_USER_DIR location, do either of the following:
*
Set the SQLDEVELOPER_USER_DIR environment variable to specify another directory path.
*
Edit the <sqldeveloper_install>sqldevelopersqldeveloperbinsqldeveloper.conf file and substitute the desired directory path for SQLDEVELOPER_USER_DIR in the following line:
If you want to prevent other users from accessing your user-specific SQL Developer information, you must ensure that the appropriate permissions are set on the directory where that information is stored or on a directory above it in the path hierarchy. For example, on a Windows system you may want to ensure that the sqldeveloper folder and the <user-name>.sqldeveloper folder under Documents and Settings are not shareable; and on a Linux or Mac OS X system you may want to ensure that the ~/.sqldeveloper directory is not world-readable.1.6 Database Certification for SQL Developer (Oracle and Third-Party)
This section describes Oracle and non-Oracle (third-party) databases that are certified for use with SQL Developer.
Table 1-5 lists the Oracle database certifications.
Table 1-5 Oracle Database Certification for SQL DeveloperProductReleases
Iron man 2 pc game free download for windows 7. Oracle Database
Oracle9i (9.2.0.1 and later)
Oracle10g
Oracle Database Express Edition
Oracle10g
SQL Developer can be used to view metadata and data of several non-Oracle (third-party) databases. Table 1-6 lists the third-party database certifications.
Table 1-6 Non-Oracle (Third-Party) Database Certification for SQL DeveloperDatabaseReleasesNotes
Microsoft Access
Access 97
Access 2000
Access 2003
For any Access release: no JDBC driver needed, but you must ensure read access to system tables in the .mdb file.
Microsoft SQL Server
SQL Server 7
SQL Server 2000
SQL Server 2005
For any Microsoft SQL Server release: JDBC driver jtds-1.2.jar required; included in jtds-1.1-dist.zip available from sourceforge.net.
MySQL
MySQL 3.x
MySQL 4.x
MySQL 5.x
For any MySQL release: JDBC driver required. For MySQL 5.x: mysql-connector-java-5.0.4-bin.jar, which is included in mysql-connector-java-5.0.4.zip
For information about creating and using connections to third-party databases, see the information about database connections in the SQL Developer online help or Oracle Database SQL Developer User’s Guide.1.7 Advanced Security for JDBC Connection to the Database
You are encouraged to use Oracle Advanced Security to secure a JDBC connection to the database. Both the JDBC OCI and the JDBC Thin drivers support at least some of the Oracle Advanced Security features. If you are using the OCI driver, you can set relevant parameters in the same way that you would in any Oracle client setting. The JDBC Thin driver supports the Oracle Advanced Security features through a set of Java classes included with the JDBC classes in a Java Archive (JAR) file and supports security parameter settings through Java properties objects.
For more information about using Oracle Advanced Security, see Oracle Database JDBC Developer’s Guide and Reference.1.8 Finding SQL Developer Accessibility Information
For the latest configuration information or for information on addressing accessibility and assistive technology issues, see the Oracle Accessibility FAQ at http://www.oracle.com/accessibility/faq.html.
Also, check the SQL Developer release notes (readme.txt file) to see if there are any currently known issues regarding accessibility.1.9 Using a Screen Reader and Java Access Bridge with SQL Developer
To make the best use of our accessibility features, Oracle Corporation recommends the following minimum technology stack:
*
Windows 2000 or Windows XP
*
Java Sun J2SE 1.5.0_05
*
Sun Java Access Bridge 1.1 or higher
*
JAWS 3.70.87, or 5.10 or higher
Follow these steps to set up a screen reader and Java Access Bridge. If you are using JAWS 3.70.87, see the additional configuration information provided after the procedure.
*
Install the screen reader, if it is not already installed. (See the documentation for your screen reader for more information about installation.)
*
Install SQL Developer.
*
Download Java Access Bridge for Windows version 1.1. The file you will download is accessbridge-1_1.zip. It is available from http://java.sun.com/products/accessbridge. (See the Java Access Bridge documentation available from this Web site for more information about installation and the Java Access Bridge.)
*
After downloading the file, extract (unzip) the contents to a folder, for example, accessbridge_home.
*
Install Java Access Bridge by running Install.exe from the <accessbridge_home>installer folder.
The installer first checks the SDK version for compatibility, then the Available Java virtual machines dialog displays.
*
Click Search disks. Then select to search only the drive that contains the SQL Developer build and the SDK version in the program files directory (if it exists).
The search process can take a long time on a large disk with many instances of SDK or SQL Developer, or when searching multiple disks. However, unless you complete an exhaustive search of your disk, Access Bridge will not be optimally configured, and will not be correctly installed to all of the Java VMs on your system. After selecting the disk to search, click Search.
*
Confirm that you want to install the Java Access Bridge into each of the Java virtual machines displayed in the dialog, by clicking Install in All.
*
Click OK when you see the Installation Completed message.
*
Confirm that the following files have been installed in the WinntSystem32 directory (or the equivalent Windows 2000 or XP directory), or copy them from <accessbridge_home>installerinstallerFiles because they must be in the system path in order to work with SQL Developer:
Note that the system directory is required in the PATH system variable.
*
Confirm that the following files have been installed in the <sqldeveloper_install>jdkjrelibext directory, or copy them from <accessbridge_home>installerinstallerFiles:
*
Confirm that the file accessibility.properties has been installed in the <sqldeveloper_install>jdkjrelibext directory, or copy it from <accessbridge_home>installerinstallerFiles. Confirm that the file accessibility.properties includes the following lines:
*
Only if you are using JAWS version 3.7, do the following: modify t
https://diarynote-jp.indered.space
コメント